aruba

To run OSPF on HP Procurve switches, you will most likely need the "Premium" software license.  Once you have that, configuring OSPF is fairly easy, although different from the Cisco approach:

For example, I want to enable OSPF in area 0 on my HP core switch (HP 5406):

1. Enter OSPF configuration

(config)#router ospf

2. Define the OSPF areas to be

To create a LACP trunk on an HP 2910 switch, follow these commands:

On both switches:

1. Log into the HP switch CLI, and enter configure mode
2. Identify the interfaces you want to use for the trunk and type:
   
   trunk 25-26 trk1 lacp
   
   "25-26" are the interfaces used in the trunk
   
   "trk1" defines this specific trunk
   
   "lacp" defines lacp as the